.: AUDI KLUB POLSKA :.

Czy testował już ktoś nowy interfejs VAG K+CAN Commandera ???
Z opisu wynika, że robi cuda


MAKING DEALER KEYS for almost all VAG models including latest models 2008+ (supported are all models which are using Megamos 48 or Hitag-2 transponders)

Own precoded transponders TA2/TA3/TA4/TA5 are used in ABRITES VAG Commander 6.2 to produce dealer keys.

Dealer keys are made from the TA2/TA3/TA4/TA5 using the 6 or 7 bytes of the component protection data (making from the 7 bytes is made immediately while making from the 6 bytes requires till 10min).

Possible to produce TP22/TP23/TP24/TP25 transponders from the ABRITES TA2/TA3/TA4/TA5 transponders.

Decoding of the Passat B6 comfort module in order to get all 7 bytes of the component protection data.

Extended support for MED9x engine control units.

Extended support for EDC17x engine control units.

Support of new software versions for Skoda Roomster, Skoda Fabia, VW

Polo, Seat Ibiza (2008 year).

BY OBDII - EDC17/MED17 reading security access/component protection/mileage

ECU Siemens SIMOS PPD - by OBDII reading security access code/component protection

MED9 crypted EEPROM - by OBDII reading security access code/component protection

Skoda Superb 93C86 crypto - Read/Write EEPROM of instrument cluster by OBDII. Mileage correction/PIN.

Tool for preparation transponders like ordered from dealer so for VW Passat 6,... can be used usual TP23

Possibility for skiping component protectin while programming keys in VW/Seat/Skoda

EDC16 Immobypass function by OBDII

Full diagnistic activities KWP2000 under K/CAN TP2.0 and TP1.6, KWP1281 under CAN/K, UDS - identification, DTCs, coding, adaptations, basic settings, measured values,... Manual definition of the running diagnostic session.

Broadcast diagnostic requests - disable/enable normal communication, clear all DTCs, transport mode,...

Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Supported is also adaptation of a

KESSY unit to the vehicle (K/CAN/Porsche-CAN)

Special function - Reading PIN(SKC)/component/mileage protection from ECU-EDC17 by OBDII

Special function - Reading PIN(SKC)/component/mileage protection from ECU-SIMOS PPD by OBDII

Special function - BYPASS IMMOBILIZER from EDC16 by OBDII

Special function - READING EDC16x EEPROM by OBDII

Special function - Reading/Writing odometer in EDC16x by OBDII

Special function - Reading Security Access Code/Login WFS from EDC16x by OBDII

Special function - Reading Security Access Code/Login WFS from MED 9.x by OBDII

Special function - Reading odometer value stored in MED9.x by OBDII

Special function - read Security Access Code/Login WFS.

Special function - read/program immobilizer data stored in the immobilizer.

Special function - programming immobilizer data stored in the EEPROM of EDC16 and MED9x by OBDII.

Special function - programming reflashing counters stored in the EEPROM of EDC16 by OBDII. Now supported EDC16CP34 VW Touareg!

Special function - read/write EEPROM from instrument cluster/immobilizer.

Now is covered also Audi A4 BOSCH RB8 Crypto cluster, VW Touareg 2007/2008 CAN, VW Phaeton 2008 CAN, Porsche Cayenne 2008 CAN, Bentley Continental 2008 CAN , Skoda Superb Crypto cluster, Skoda Roomster ..! Possibility to extract security access codes from BOSCH RB4/RB8 clusters.

Special function - VAG MMI TV Activation - now covers year 2007.

Special function - Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8,Porsche.

Special function - Key learning. Can be programmed key to Audi A8, Audi A3, Skoda Octavia II (2007+), VW Touareg 2007/2008, VW Phaeton 2008, Bentley Continental 2008, Porsche Cayenne 2008 independed from component security protection! Allowed is direct connection with HITAG-2 programmer. Special keylearning procedure for Audi A4 BOSCH RB8.

Possibility to add key without losing older existing keys (A3,VW,Seat,Skoda-unit Cluster+Immobilizer).

Special function - Airbag units - Read/Write EEPROM by diagnostic! Clearing crash data! All VW/Audi/Seat/Skoda-Bosch/Siemens airbag modules up to year 2005

Special function - Custom memory reading from different units like ECUs, EZS-Kessy and s.o..

Special function - Read / Write flash memories EDC17, EDC16x, EDC15x, ME7x, MED9x, Simos PPD1.x (EDC16 - checksum calculations while programming

Special function - Read / Write of reflashing counters stored in the EEPROM of EDC16 by OBDII (now not possible to be detected that your engine control unit is reflashed! ADDITIONALY NOW YOU CAN SET FLASHTOOL

NUMBER TO ANY VALUE!

Special function - Calculators by dump of EEPROM - KESSY - security code,

SIMOS PPD1.4/1.5 security code, Skoda Fabia, Skoda Roomster, VW Polo,

Seat Ibiza 93C86 CRYPTO; EDC16 odometer correction/checksums;

GATEWAY 95160 - odometer correction; MED9x checksums; ....

Special function - programming dashboards from VW/SEAT/SKODA (CAN) and AUDI A3 (CAN) in VIRGIN status - FREE FOR ALL OWNERS OF "IMMO PANNEL".

Special function - programming dashboards from VW/SEAT/SKODA/AUDI (K) 93C86 and AUDI A4 RB4 BOSCH in VIRGIN status - so will not need anymore from PIN code for the adaptaton - FREE FOR ALL OWNERS OF "K update instrument cluster".

Jeżeli to wszystko prawda co jest on wszystkomającym fejsem

A w praktyce jak ktoś ma klona K+Can to tam nie ma K, lub nie działa.

jest K ale jedna a do niektórych modeli i rzeczy np. moduł komfortu potrzeba dwóch.

Piszesz o ori commanderze? jeżeli tak to cena raczej zaporowa,a jeżeli nie to daj link do tego commandera.